A 3D printer enclosure, in a simple term, is a box that is being used to enclose the printer. It’s airtight to help in maintaining the inner temperature and taking care of the different parts of the printer. There are some 3D printer enclosures that have got a ventilation system to help in controlling the temperatures. The decision on whether to use printer enclosures depends on what filament type you’re using. It is important that you have an idea of the importance of using an enclosure for your printer before you even buy it. Some of the advantages are as follows.
1. Less heat loss
The temperature of a 3D printer is supposed to reach a certain level and be maintained at that level. When heat is lost, it must be compensated by the element which was being heated, indicating that more electricity will be needed. For heat loss to be reduced, there is a need to have a 3D printer enclosure that will make it easy to measure and maintain the right inner temperature. It does this by stopping the inner air from escaping, keeping the hot air, and preventing the electricity bill from blowing.
2. Noise reduction
When using a 3D printer, it is known to produce unwanted noise because some are very noisy to the extent that they can distract you and the people around you. It may feel uncomfortable knowing that your printing is affecting those surrounding you. By using a 3D printer enclosure together with other noise reduction components like printing in an office or an enclosed area, you will be able to minimize the noise produced while you’re in the printing process.
3. High printing quality
Ensuring that the nozzle temperature is consistent with the required temperature will produce very high-quality prints. Using a 3D printer enclosure will ensure that this is possible by keeping hot air inside the cabinet and ensuring that the temperature is maintained using proper ventilation. Maintaining a consistent temperature in the enclosure helps with warping.
4. Protection from dust particles
Using a 3D printer enclosure when printing helps in protecting the printer from getting dust and several other air particles from the surrounding environment. Dust particles, in most cases, clog the nozzle, more so in the printers that have small-sized nozzles, which can even get damaged. When the dust accumulates on the printing bed, and you don’t clean it, it will be on the print, thus making it a bad quality print. Using a 3D printer enclosure saves time in cleaning the printer and ensures you have high-quality prints.
5. Fewer fumes produced
The filaments used during the printing process release some toxic gases when heated. The fumes even double when ABS filaments are used. If the 3D printer is in the office, bedroom, or living room, it is convenient that the smell is less. Using an enclosure for the 3D printer reduces the risk of being exposed to these fumes. Some of the enclosures have got a ventilation system to pass the toxic gases and help in lowering the fume level.
In today’s world, the changes in technology have made it possible to have a small 3D printer. The small 3D printer is very portable, making it easy for you to carry when moving around. Because of the small size, you do not require a large area to operate it. It is very easy to maintain a small 3D printer. In case of repair, it does not cost a lot of money compared to the large printers Read more
