Performing renovations in your bathroom

A brand-new bathroom may be yours in just eight easy steps.

Your bathroom plays a particular role in your house. It should be calming since it is an oasis of tranquilly, yet it must be practical because it is an area for functionality. For this reason, it is absolutely worth it to take the plunge and build your own own bathroom, completely tailored to your preferences. Bathroom renovation may appear to be quite a difficult undertaking. Therefore, in order to make the task more manageable for you, we have broken it down into a series of straightforward phases.

Make a drawing of the layout of your bathroom.

It is critical to create floor plans for both the bathroom you currently have and the bathroom you intend to build in the future. You will be able to see more clearly what modifications need to be made to the plumbing and electrical wiring as a result of doing this. To get started, design a floor plan of your bathroom in its current state.

This should demonstrate

The locations of the new fixtures and pieces of furniture that you have in mind
The alterations to the plumbing that you are need to make, which may include the removal, relocation, or installation of new water and drain pipes,
The current configuration of the plumbing system, including the positions of the hot and cold water pipes as well as the drain pipes,
What adjustments do you need to make to the electrical wiring, such as removing, relocating, or installing new cables and sockets, for example?

Next, design a floor plan for the bathroom you intend to build.

This drawing ought to demonstrate

The new sanitaryware, which includes the toilet, shower, and bathtub, as well as the basins,
The brand new storage cabinets and pieces of furniture
The brand-new plumbing system, which includes sources of supply for hot and cold water as well as drain pipes
The brand-new electrical system, which comes complete with plugs, lights, and electric radiators

Take apart the old bathroom you were using.

The electrical supply, the water supply, and the drains in bathrooms all have multiple components that are connected to them. In order to securely deconstruct your previous bathroom, you should perform the tasks in the following order: first, remove all of the electrical equipment; then, remove all of the furniture; and finally, remove all of the objects that were connected to the plumbing.

Electrical appliances

The majority of the electrical devices found in bathrooms are heaters (like radiators or towel warmers).

Before you begin working, make sure the electricity is turned off at the main switch. Take out the radiator and take the towel warmer out.

For the highest level of protection, attach a terminal block or a fast connector to each exposed wire. Taking off the light fittings should be done in the same manner.

Put off installing the light fixtures until the very end if your bathroom does not have a lot of natural light. That way, you won’t have to worry about not having enough light to work on the other things.

Furniture

Now take down every piece of furniture, including any cupboards, bookcases, or mirrors there may be.

Sanitaryware

Take out the remaining fittings, including the toilet, the shower, the bathtub, and the washbasin.

Before you begin working, be sure that the water supply has been turned off both at the mains and at the supply points for each item. Keep the drains and pipes in their current positions for the time being.

Before you can remove the bath itself, you must first take off the surround and the taps that are attached to it.

It is in your best interest to save taking the shower for last so that you may maximise the amount of time you spend under its hot water!

Showers

First, remove the shower panels, then the seals, and finally, disconnect the enclosure from the wall where it was attached. Take off the fitting for the shower drain. The enclosure needs to be moved away from the wall just enough to allow access to the water supply pipes so that they can be disconnected. Take down the shower curtain and enclosure.

When taking down the shower, if you can, start by taking down the enclosure panels; this will make the subsequent procedures much simpler. First take off the mixer, then the taps, and finally the drain fitting. After removing any silicone seals that may have been encircling the tray, detach and remove the tray itself. Remove the drain pipe as the final step.

Take off the outdated tiles.

After you have taken out all of the fittings and furniture, the next step is to take out the outdated tiles from the floor and the walls.

Take up and dispose of the floor tiles.

It is not difficult to remove old floor tiles; but, in order to operate safely, you will need to have the appropriate tools and safety clothing.

To get rid of your old floor tiles, remove them in the following easy steps:

Take the skirting board off the wall.
Locate a tile that has a wobbling sound, and then use a chisel or a drill to break it.
The remaining tiles should be removed.
Get rid of any grout or adhesive that is still there.
Clear the area of any debris, then clean the floor.

Take off the tiles on the wall.

The process of removing tiles from a wall is quite similar to the process of removing tiles from a floor.

Make adjustments to the plumbing.

It’s possible that you’ll need to alter the plumbing in your new bathroom in order to accommodate the layout you have in mind for it. The following is a list of alterations that could be made:

Changing or removing locations where drainage occurs
Changing the locations of water supply stations or getting rid of them
Creating brand-new pathways for water drainage

Important! When dealing with pipe diameters, exercise caution. Supplies and drains have separate requirements. If, for instance, you replace a washbasin with a toilet, you won’t be able to put the old pipes to use anywhere else.

Water sources available

Stop the flow of water where it enters the building. Utilizing a device that serves multiple purposes, remove the supply pipes that are no longer required. Make sure to consult your blueprints before beginning the installation of any new supply pipes. Always make sure you’re using the right tools and materials.

Observe the normal procedure for placing pipe. When piping something vertically, the pipe carrying cold water is on the right, while the pipe carrying hot water is on the left. When the pipes are laid horizontally, the cold pipe is placed underneath, and the hot pipe is placed on top.

Waste water drains

Consult your blueprints to determine the specific locations of the new drains that need to be installed. Make use of a PVC pipe cutter to get rid of the pipes and fittings that are no longer required in order to get rid of outdated drain pipes or to relocate them. Create your new drainage system by putting together your new PVC pipes and fittings in the appropriate order.

Drainage channels

Make adjustments to the electrical wiring.

It is possible that you will need to re-route the electrical wiring in your brand-new bathroom due to the configuration of the space.

Specifications regarding electricity for bathrooms

The electrical wiring in a bathroom is subject to a number of specific regulations and must be installed with extreme caution. Make sure that the electrical appliances you purchase have the appropriate protection rating (IP) for the zone in which you intend to install them (zone 1, zone 2, elsewhere).

Adapting the already-installed electrical wiring

Checking the integrity of the current electrical wiring and asking yourself a few important questions before installing new sockets or replacing old ones is a smart idea. Here are some of the things you should ask yourself:

Do you know if there is a circuit breaker in the system?
Does the system have a relationship to the planet Earth?
Are there any wires that are not covered?

Important!

When remodelling a bathroom, it is imperative that you routinely inspect the state of the wiring and sockets that you desire to keep in the space. Both the existing and newly installed components of the electrical system are required to demonstrate compliance with the applicable standards. As soon as you are content with the results, you can modify the circuit and reposition the wires in any way that is convenient for you in order to install new light fittings, sockets, and switches.

Before beginning work on the electrical system, you should make sure that the power is turned off at the mains. This is for your own protection.

Walls should be updated as well.

It is recommended that you renovate the walls of your home before beginning work on the floor. You’ll avoid causing damage to your freshly laid floor coverings if you do it this manner.

deciding what to put on walls

There are several kinds of wall coverings that should not be used in the bathroom at all. The materials you select need to be able to endure high levels of humidity as well as occasional splashes of water. The decision basically comes down to whether you want waterproof paint or wall tile.

Whether you plan to tile or paint your walls will determine the specific preparation steps you need to take before beginning either project. When you paint, you need a surface that is absolutely flawless and free of any imperfections, although adhesive and tiles can cover up somewhat uneven surfaces.

Painting requires a higher level of preparation on your walls than tiling does, but after that step is completed, painting is much less difficult to undertake than tiling. If you want a finish that will endure for a long time, choose a paint that is specially developed for bathrooms. In this way, the paint will be able to tolerate the humidity in the bathroom.

You will need to complete the task of tiling your walls in stages, making use of the appropriate instruments and supplies at each stage (tile cutter, adhesive spreader, grinder, adhesive, grout, etc.).

Install the floor covering you have chosen.

It is recommended that you complete the floor before beginning to bring in the furniture. Although ceramic tile is by far the most common option, you are not limited to just one option when it comes to bathroom floor coverings.

Before you can begin laying your floor, you are need to install a few different things first. Drains for walk-in showers and low-profile trays are two examples of this type of product.

Every type of floor covering must be installed on a surface that is stable, level, and thoroughly cleaned. You might also need to apply a levelling compound, but that will depend on the type of covering you decide to use. There is a possibility that you may need to prepare the floor before installing ceramic tiles or vinyl.

After you have effectively prepared your floor, you can next begin to lay the covering. In this section, we will demonstrate how to install ceramic tile, although you are free to select a different kind of covering if you want.

Install the various pieces of sanitaryware.

Installing the various components that need to be connected to the water supply and drains can be done after the floor has been arranged and allowed to dry.

Shower stalls and column assemblies

Taps, fixed shower heads, hand-held shower heads, and riser rails are just some of the many individual pieces, kits, and completely equipped columns from which you can make your selection. The column is the most comprehensive option, and some models even come equipped with water jets that provide a hydromassage.

Leaving your panels open will allow you to construct a walk-in shower that is both functional and fashionable. You also have the option of closing off your shower with a door that slides, pivots, swings, folds, or swings and folds, depending on what works best with the design of your bathroom.

Toilets that are installed on the floor and on the wall

There are traditional types of the toilet that are installed on the floor, and there are also variants that hang on the wall. Wall-hung models are more difficult to install since they require a support structure during the process. However, once they are in place, they look excellent.

Bathtubs

Bathtubs are available in a number of different forms to accommodate a variety of bathroom designs, including rectangular for more straightforward bathrooms, corner for bathrooms with limited floor space, and island for larger bathrooms.

For an even higher level of opulence, you can get bathtubs equipped with hydromassage features, such as strong water jets.

After you have ensured that all of the sanitaryware is properly connected, switch on the water supply and look for any leaks. Verify that the drains are functioning properly as well.

Cabinets de toilette

Depending on the layout of your brand-new bathroom and the amount of available space, you have the option of installing a vanity unit with either a single basin or a double basin. You have the option of installing your basins in the cabinetry or on the countertop, and your vanity unit may either be wall-mounted or freestanding, and it can be pretty much whatever dimension you like.

Warmers for the towels

Towel warmers are an essential component of any bathroom design since they not only retain and dry your towels, but they also contribute to the overall warmth of the space.

They are small, so they can be installed in any kind of bathroom, and they are available in a variety of designs, so you can choose one that goes with the aesthetic of your home.

Accessories for lighting

Wall lamps, ceiling lights, or recessed spotlights are all great options for providing illumination in a bathroom.

Always select a protection (IP) grade that is suitable for the bathroom zone in which you intend to install the light. Even over your shower, for instance, you can install spotlights with an IP 65 rating for extra-low voltage.

Because it is for your own good.

Before doing any kind of electrical work, you should always turn off the mains electricity. When putting in new home appliances, it is imperative that you always connect them in accordance with the instructions provided by the manufacturer.

Post Views: 449