Scratches can cause a great deal of damage to SPC flooring. There are some basic cleaning methods to avoid these unsightly marks. First of all, do not use abrasive scrubbing tools on SPC floors. Then, you should use an anti-oxidant stain remover, such as Prevail Scratch Remover, to reduce the visibility of minor scratches.
Avoiding abrasive scrubbing tools
It’s important to avoid using abrasive scrubbing equipment on SPC flooring. Steam cleaners produce excessive heat that weakens the adhesive bonds and plank structure. It can also lead to bubbling, edge cupping, and warping. Avoid using steam cleaners on SPC flooring unless you’re using an extra-strong broom. Use a damp cloth instead.
While SPC flooring is durable, it’s important to use a cleaning solution recommended by the manufacturer. Avoid wax cleaning solutions and other chemical agents that can dull the surface layer. If you have new SPC floor tiles, make sure to use the right cleaning solution. Using the wrong waxing products or abrasive scrubbing tools could cause more damage.
Using non-abrasive brooms and soft brushes can help prevent scratches. Then, remember to protect your SPC floor from direct sunlight. A non-colorfast floor protector is essential to avoid fading. Scrubbing with abrasive tools can also cause dents on your SPC floor. If you must use a broom or scrubbing tools, you should use a soft brush or a soft bristle broom.
SPC floors are scratch-resistant but not damage-proof. Careful cleaning will preserve the beauty of your SPC floors for years to come. Proper cleaning will help you get the most out of your investment. If you do happen to accidentally scratch your SPC floor, you can replace it easily. And if you have a large-gauge floor, consider putting a piece of hardwood paneling or plywood underneath it.
Avoiding antioxidant staining
To avoid the appearance of color stains and scratches on SPC floors, use protectors made of rubber instead of felting. Avoid using cleaning agents with strong abrasive properties on these floors. Also, avoid over-mopping them as this can weaken the adhesion and edges of the flooring, causing scratches and dents. Always wipe up spills immediately with a damp cloth.
Using a steam cleaner can damage SPC floors. The high temperature of the steam produced by the cleaner weakens the glue and layers in the plank structure. This may result in bending, bubbling, and edge cupping. In addition, excessive heat can result in damage to the warranty. Therefore, it is advisable to avoid steam cleaning for SPC floors. Instead, invest in a good-quality doormat that does not stain easily. Place one at each entryway to the house. Alternatively, you can adopt a ‘no shoes’ policy in your home.
SPC flooring is made of limestone that supports a PVC powder core. It is more durable than flexible LVT floors. As a result, it is waterproof and impact-resistant. In addition, SPC flooring doesn’t use harmful adhesives or substances, and it is also more compact than flexible LVT. By choosing a durable floor at https://pvcvinylflooring.ae/, you can rest assured of its long-term performance.
Prevail Scratch Remover reduces the visibility of minor scratches
Using a product such as Prevail Scratch Remover on SPC vinyl plank floors can significantly reduce the appearance of scratches. If the scratches are minor, a little bit will go a long way. It is possible to fix the scratch within minutes using just a few supplies. Once the scratch has been repaired, the area should be smooth to the touch, and the scratches should no longer be visible. Make sure that the scratch was caused by furniture feet, as they may contain nails. If so, sand those rough areas.
For best results, cleaning the floor first is essential. You can use a solution of dish detergent and water. It will cut through the grease and other debris, making it easier to apply Prevail Scratch Remover. Make sure to rinse the floor thoroughly afterward, as any remaining dirt will prevent the proper repair. Allow the floor to dry completely before continuing with the process.
