RSpedia
Fitness

Complete Manufacturing Process of Boxing Gloves

face-mask-

Many people enjoy fighting as a form of entertainment. Humans have been fist-fighting for at least six thousand years, starting in what is now Ethiopia, before the fighting was popular all over the ancient world. In the sport’s early days, people thought it was too brutal and tried to ban or restrict it, but they failed. Boxing is a tough sport, and boxers have sought ways to protect themselves from their opponents’ blows and to deliver more damage while minimizing the impact of their own punches through the years. Some of their efforts have been particularly inventive: They developed boxing gloves, for instance, and padded headgear. 

Let’s get started and explore what material is used and how are these gloves made.

Raw Material

Most boxing gloves are made from leather, and the majority of them are made from cowhide or goatskin. If a glove is made from vinyl, it’s usually not very high-quality. 

Some hand-makers use leather for the glove lining, but the majority prefer nylon taffeta. Gloves are stitched with nylon thread, and padding is of a high-density polyurethane.

Boxing glove manufacturers use various forms of padding, including cotton batting and polyvinyl chloride foam in sheet form, because the weight and thickness of the padding affect how well a glove protects the wearer’s hands from being hurt by force applied to them during a match. Manufacturers also use horsehair since that material is very durable yet not too bulky.

Design of Boxing Gloves 

When it comes to designing boxing gloves, one of the primary concerns is padding. Padding material needs to be able to absorb energy while compressing. If it compresses too much, it loses its effectiveness because it becomes a thin layer of dense material. That’s why different weight categories require gloves of different weights.

Glove weight is adjusted by adding or removing layers of padding to suit the boxer’s weight. Boxers in heavier divisions would have to wear gloves that were too heavy and cumbersome, while boxers in lighter divisions would have to wear gloves that were too light and offered little protection.

Materials that offer good energy absorption also tend to retain their deformation for a while after the initial impact. This means that an initial blow is cushioned, but subsequent blows are not as cushioned.

Other design criteria stem from rules and regulations of various sanctioning bodies, including USA Boxing, which regulates much of amateur competition in the United States and sanctions all Olympic-style competition.

Boxing gloves used in international competitions, such as the Olympics, must have a portion of their leather covering the knuckle area dyed white so referees can readily see if a boxer has been hit.

The Manufacturing Process 

Pattern and Cutting 

Every boxing glove is made by one of our expert craftsmen at Infinitute Fight. The making of a glove begins with each craftsman forming the basic pieces of leather – the palm and knuckle region, the thumb, the cuff, and the closure area. The craftsman cuts these pieces bigger than they will be upon completion so that they can be stuffed with pouches.

In the cutting room, large pieces of leather are laid out on cutting tables. The pattern for each piece is placed on the leather and arranged so it can be efficiently cut from that piece. The pattern is then traced onto the leather and cut with large scissors. The lining material is cut to line the palm, thumb, cuff, and knuckle areas.

Stitching 

When a boxing glove is made, the leather shell is stitched together inside-out. The smaller pieces and finishing work are then completed by hand. Double stitching is also used in many top-quality boxing gloves.

The knuckle piece, which is cut oversize, is fitted over a model of a fist to achieve the correct shape. The seam is then gathered and sewn so that the knuckle piece balloons slightly around the fist. Gathering the seam causes the piece to take on its clenched fist shape.

The back halves of the thumb piece are formed by the knuckle piece. The lining is attached, and padding is stuffed. The thumb piece is then stitched onto the glove.

Stuffing 

The entire glove is turned right side out by slipping the padding over the index finger first. Manufacturers can purchase sheets of foam padding in standard sizes, so the padding in the knuckle area is made by layering two foam sheets and then cutting the combined material to the desired shape. 

Rather than requiring manufacturers to purchase or produce a different molded piece for each model of glove, this practice allows them to use one standardized thickness of padding. 

Manufacturers trace the pattern onto padding material and cut it. At some point in the manufacturing process, pattern pieces may be cut in mass beforehand and kept in stock for assembly.

The cuff is the last piece to be attached to a pair of gloves. The cuff and its lining are attached to each other, and the piece is stuffed. The ends of this assembly are not attached together as the piece will eventually form part of the gloves’ closure area.

This was all about the manufacturing process of boxing gloves. Now, if you are planning to buy boxing gloves, you can check the quality of them  and know if the standard process was followed during their making. Also, at Infinitude Fight, the boxing gloves prices are quite reasonable, and they follow all these steps while making.  So you can buy many gloves without breaking your bank!

FAQs

  1. What is the best material for boxing gloves?

When choosing boxing gloves, look for cowhide or goatskin leather, or imitation leather, rather than vinyl. The latter can tear easily and is not as durable. Strong nylon thread stitching is also important to consider when buying boxing gloves.

  1. Where do boxing gloves come from?

Ancient Middle Eastern and Egyptian depictions of boxing date back to 2000 BC; rudimentary gloves date back to 1500 BC. Boxing contests for sport have been practiced in Greece since antiquity.

  1. What foam is in boxing gloves?

The premier boxing glove is made of a synthetic sponge foam outer layer and a medium-density EVA foam inner layer that almost never breaks down. It has an extra 10mm of foam for knuckle protection.

click here more

Related posts

Nutrition Research Topics For Students Suggested By Best Assignment Help

jlucy

A History of Hair Removal

kajalparmar

Helping You Find The Best Shapewear In Town

kajalparmar

Leave a Comment